International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Mechanical Behavior of Epoxy- Phenol Formaldehyde Hybrid Blend

Abstract

Phenol formaldehyde resin was mixed with epoxy resin in different weight fraction (0-20) wt. % to formation hybrid blend which used as a new part in engine oil tank of the cars. The properties of the new blend were studied and included: Impact strength, tensile strength, compressive strength, Shore D Hardness and bending resistance. Results showed improved properties of epoxy resin after adding phenol formaldehyde.

Country : Iraq

1 Mustafa A. Rajab2 Dr.Sabah Anwar Salman3 Maher Nazem Abdullah

  1. Mechanical Department, Technical Institute of Baqubah, Middle Technical University, Iraq
  2. Faculty of Science - University of Diyala, Iraq
  3. Ph.D Student, Faculty of Science - University of Diyala, Iraq

IRJIET, Volume 2, Issue 6, August 2018 pp. 1-4

Full Paper
Download

References

  1. Mustafa A. Rajab, Ekhlas I. Kader, Ali A. Hamod, Abdul Hameed I. Hameed,  “Mechanical properties of silica, graphite and carbon fiber reinforced composites” , International Journal of Engineering and Technology (IJET) , Vol 9 No 5 Oct-Nov 2017.
  2. Dr. Mustafa A. Rajab, Dr. Ali Adwan Hammod, Dr. Ekhlas I. Kader, Abdul Hameed I. Hameed, “Mechanical properties (Tensile, Hardness and Shock resistance) for the phenol formaldehyde resin with Epoxy resin”, Diyala Journal of Engineering Sciences, 4, 55 – 60, 2018.
  3. Jun Zheng, "Studies of pf resole / isocyanate hybrid adhesives ", Ph.D., Thesis, Virginia Polytechnic Institute and State University, 2008.
  4. Ali I.Al-Mosawi “Study of Some Mechanical Properties for Polymeric Composite Material Reinforced by Fibers”, Al-Qadessiyah Journal For Engineering Science, Vol. 2, No 1, pp.14 – 24, 2009.
  5. Dr. Mustafa A. Rajab, Dr. Ekhlas I. Kader, Abdul Hameed I. Hameed.., “: FLEXURAL AND SHOCK STRENGTH OF SILICA, GRAPHITE AND CARBON FIBER REINFORCED COMPOSITE MATERIALS”, 5th International Conference on Innovation Challenges in Multidisciplinary Research Practices (ICMRP-December 15-16, 2017) Singapore, 2017.
  6. P.K. Mallick “Fiber-Reinforced Composites: Materials, Manufacturing, and Design”, 3rd Edition, CRC Press, 2007.
  7. Dr. Abbas A. Al-Jeebory, Ali I.Al-Mosawi, Sajed A. Abdul Allah “Effect of percentage of  Fibers Reinforcement on  Thermal and Mechanical Properties for Polymeric  Composite Material ” , Iraqi Journal of Mechanical and Materials Engineering , First Conference of Engineering College , 2009.
  8. E.P.De.Garmo, J.T. Black, and R.A. kohser “Materials and processes in Manufacturing”, 10th Edition, john Wiley & Sons, 2008.
  9. Halem, Ali Hoby, “Improvement Properties of Reinforced Plastic Materials”, MSC Thesis, Engineering College, Babylon University, Iraq, 1999.

Copyright @ 2026-2017 IRJIET. All Right Reserved.

Developed by Byzero Technologies