Battery Storage and Demand Power Management for Economic Operation of the Smart Grid System by using Chaotic Improved Honey Bee Mating Optimization

Abstract

A logic based algorithm developed for Battery Storage Power Management and Demand Side Power Management for the Smart Grid. This algorithm enables lower cost operation of the smart grid by utilizing the time of use electricity pricing concept. Applying the chaotic improved honey bee mating optimization to the SSG. The BSPM can strategically handle fluctuation PV production. They can intelligently alternating between absorbing power during high solar irradiation periods and discharging power to the load during peak consumption times. This algorithm used to efficiently managing both BSPM and DSPM. They can increase stability and reliability of the Smart Grid network. In this system electricity demand on the Smart Grid during peak time is reduced providing the balance between supply and demand. BSPM and DSPM in power systems are maintained.

Country : India

1 Dr.N.Mohanapriyaa2 K.Thamaraiselvi3 P.Madhumathi

  1. Professor, Dept. of Electrical and Electronics Engineering, Vivekanandha College of Engineering Women [Autonomous], Tiruchengode, Tamilnadu, India
  2. M.E Scholar, Vivekanandha College of Engineering Women [Autonomous], Tiruchengode, Tamilnadu, India
  3. M.E Scholar, Vivekanandha College of Engineering Women [Autonomous], Tiruchengode, Tamilnadu, India

IRJIET, Volume 3, Issue 4, April 2019 pp. 10-16

References

  1. Amir-Hamed Mohsenian-RadVincent W. S. Wong, Juri Jatskevich,, Robert Schober, and Alberto Leon-Garcia (2010), “Autonomous Demand-Side Management Based on Game-Theoretic Energy Consumption Scheduling for the Future Smart Grid” , IEEE transactions on smart grid, vol. 1, no. 3,pp .62-75.
  2.  Diego Arcos-Aviles, Luis Marroyo, Pablo Sanchis, & Francesc  Guinjoan,(2016), “ Fuzzy Logic-Based Energy Management System Design for Residential Grid-Connected Microgrids” ,   IEEE Transactions on Smart Grid ,  vol ,8, no .5 ,pp .55-61.
  3. Fadoul Souleyman Tidjani, Abdelhamid Hamadi & Ambrish Pragasen Pillay (2014) “Optimization of Standalone Microgrid Considering Active Damping Technique and  Smart Power Management using Fuzzy Logic Supervisor”, IEEE transactions on smart grid ,vol .60 ,no .11,pp. 324-331.
  4. Fesanghary M, Ardehali MM (2009), “A novel meta-heuristic optimization    methodology for solving various types of economic dispatch problem”, IEEE transactions on industrial electronics;vol. 34,no.6 ,pp .84-90.
  5. Hui S. (2010 ), “Multi-objective optimization for hydraulic hybrid vehicle based on adaptive simulated annealing genetic algorithm”, Engineering Applications of Artificial Intelligence; vol. 23,no. 3 ,pp .92 - 113.
  6. Hristiyan Kanchev, Di Lu, Frederic Colas, Vladimir Lazarov, & Bruno  Francois,(2011), “Energy Management and Operational Planning of a Microgrid With a PV-Based Active  Generator for Smart Grid Applications”, IEEE transactions on industrial electronics, vol. 58, no. 10,pp 112-124.
  7. Hung Khanh Nguyen, Ju Bin Song, & Zhu Han (2014) , “Distributed Demand Side Management with Energy Storage in Smart Grid” , IEEE Transactions on Parallel and Distributed Systems,vol.36, no. 9 ,pp. 321-332.
  8. Jianlou Lou1, Jizhe Xia& Hongjian Zheng (2017), “Application of Optimized GSA Algorithm on Bad-data Detection of Electric Power Dispatching System”,   Advanced Science and Technology Letters Vol.143, no.74, pp.169-175.
  9. Jose Medina, Nelson Muller, & Ilya Roytelman, (2010) , “Demand Response and Distribution Grid Operations: Opportunities and Challenges” , IEEE transactions on smart grid, vol. 1, no. 2,pp. 41-54.
  10. Juan J, Cárdenas , Luis Romeral, Antonio Garcia & Fabio Andrade (2011) , “Load  forecasting framework of electricity consumptions for an Intelligent Energy Management System in the user-side” ,Elsevier , Expert Systems with Applications vol .6, no .3, pp. 65-72.
  11. Lee T.-Y., Chen, N (2015) “Determination of optimal contract capacities and optimal sizes of battery energy storage systems for time- of-Use rates industrial customers”, IEEETrans. Energy Convers., vol .10, no .3, pp. 562– 568.