Design of Solar PV Operated Formal DC-DC Converter Fed PMBLDC Motor Drive for Real-Time Applications

Abstract

The paper presents an efficient speed control of brushless DC (BLDC) motor drive for solar photo-voltaic (PV) system fed system. An interleaved boost converter is employed in the system to boost the solar PV system low output voltage to a level required for the drive system. Interleaved boost converter is operated in closed-loop mode to attain accurate and steady output. The converter (VSI) for BLDC is switched at fundamental frequency and reduces high frequency switching losses. Internal current control method is developed and employed for the speed control of PV fed BLDC motor by sensing the actual speed feedback. The appropriateness of the internal current controller for the speed control of PV fed BLDC motor is verified for incremental speed with fixed torque and decremental speed with fixed torque operating conditions. Also the system with speed control is verified for variable torque condition. The system is developed and results are developed using powersim software. The suitability of proposed system at practical operating conditions is demonstrated through simulation results using powersim followed by an experimental validation.

Country : India

1 R.Yalini2 K.Moorthi3 A.Ambika

  1. HOD/Associate Professor, Dept. of EEE, Jayam College of Engineering and Technology, Tamilnadu, India
  2. PG Scholar, Power Electronics and Drives, Jayam College of Engineering and Technology, Tamilnadu, India
  3. Assistant Professor, Dept. of EEE, Jayam College of Engineering and Technology, Tamilnadu, India

IRJIET, Volume 6, Issue 6, June 2022 pp. 244-252

doi.org/10.47001/IRJIET/2022.606038

References

  1. P. K. Sharma and A. S. Sindekar, "Performance analysis and comparison of BLDC motor drive using PI and FOC," 2016 International Conference on Global Trends in Signal Processing, Information Computing and Communication (ICGTSPICC), Jalgaon, India, 2016, pp. 485-492.
  2. V. Ramesh, Y. Kusuma Latha, “An Interleaved Boost Converter Based PFC Control Strategy for BLDC motor,” International Journal of Electrical and Computer Engineering (IJECE), Vol. 5, No. 5, October 2015, pp. 957~966.
  3. T. Raghu, S. Chandra Sekhar, J. Srinivas Rao, “SEPIC Converter based-Drive for Unipolar BLDC Motor,” International Journal of Electrical and Computer Engineering (IJECE), Vol.2, No.2, April 2012, pp. 159~165.
  4. Lei Jin-li, “Adaptive Control for Brushless DC Motor Based on Fuzzy Inference,” TELKOMNIKA Indonesian Journal of Electrical Engineering, Vol.12, No.5, May 2014, pp. 3392 ~ 3398.
  5. C. Bharatiraja, Shyam Babu, V. Krishnakumar, P. Sanjeevikumar, Nixon George, “Investigation of Slim Type BLDC Motor Drive with Torque Ripple Minimization using Abridged Space-Vector PWM Control Method,” International Journal of Power Electronics and Drive System (IJPEDS) Vol. 8, No. 2, June 2017, pp. 593~600.
  6. D. Kamalakannan, N. J. Singh, M. Karthi, V. Narayanan and N. S. Ramanathan, "Design and development of DC powered BLDC motor for Mixer-Grinder application," 2016 First International Conference on Sustainable Green Buildings and Communities (SGBC), Chennai, 2016, pp. 1-6.
  7. M. K. Kim, H. S. Bae and B. S. Suh, "Comparison of IGBT and MOSFET inverters in low-power BLDC motor drives," 2006 37th IEEE Power Electronics Specialists Conference, Jeju, 2006, pp. 1-4.
  8. A.Bag, B. Subudhi and P. K. Ray, "Grid integration of PV system with active power filtering," 2nd International Conference on Control, Instrumentation, Energy & Communication (CIEC), Kolkata, 2016, pp. 372-376.
  9. D. Noel, F. Sozinho, D. Wilson and K. Hatipoglu, "Analysis of large scale photovoltaic power system integration into the existing utility grid using PSAT," SoutheastCon 2016, Norfolk, VA, 2016, pp. 1-7.
  10. V. S. Bugade and P. K. Katti, "Dynamic modelling of microgrid with distributed generation for grid integration," International Conference on Energy Systems and Applications, Pune, 2015, pp. 103-107.