International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Select the Optimum Die Design for Flange Coupling Forming By Hot Forging

Thanoon Luqman ThanoonMechanical Engineering Department, College of Engineering, University of Mosul, IraqMohammed Najeeb AbdullahMechanical Engineering Department, College of Engineering, University of Mosul, Iraq

Vol 6 No 9 (2022): Volume 6, Issue 9, September 2022 | Pages: 114-120

International Research Journal of Innovations in Engineering and Technology

OPEN ACCESS | Research Article | Published Date: 07-10-2022

doi Logo doi.org/10.47001/IRJIET/2022.609018

pdf iconFull Text PDF
Abstract

In this study, dies are designed and manufactured to produce a flange coupling with hot-closed forging process to select the optimal die by comparing the locations of flash. The study was carried out computationally using DEFORM 3D program in two stages. The first one was used to obtain a work piece with suitable dimensions used in the final stage of the forming process to prevent the defects of the forming process. Through the simulation process for all the proposed dies, the results of forming load, effective stress, strain effective and movement of metal particles were compared for optimum die. Experimentally, the forging process was carried out on a mechanical forging machine for the optimal die according to the data obtained from the simulation program.

Keywords

die design, simulation, flange coupling, forging, flash


Citation of this Article

Thanoon Luqman Thanoon, Mohammed Najeeb Abdullah, “Select the Optimum Die Design for Flange Coupling Forming By Hot Forging” Published in International Research Journal of Innovations in Engineering and Technology - IRJIET, Volume 6, Issue 9, pp 114-120, September 2022. Article DOI https://doi.org/10.47001/IRJIET/2022.609018

Licence Copyright (c) 2026 International Research Journal of Innovations in Engineering and Technology creative common licence This work is licensed under Creative common Attribution Non Commercial 4.0 Internation Licence
References
  1. Mikell P. Groover, (2013), "Fundamentals of Modern Manufacturing Materials, Process and Systems", 5th Edition, John Wiley & Sons, Inc.
  2. Khaleed Hussain and etc., (2009),"A Study on Cold Forging Die Design Using Different Techniques", Modern Applied Science Journal, Vol. 3, No.3, p.143.
  3. M. Sedighi and etc., (2009), “Using FVM simulation and ANN to predict forging load for different gutter dimension in forging process”, Proceedings of the Third International Conference on Modeling, Simulation and Applied Optimization Sharjah, U.A.E.
  4. C E Megharaj and etc., (2016),” Design and Analysis of a Forging Die for Manufacturing of Multiple Connecting Rods”, IOP Conf. Series: Materials Science and Engineering.
  5. Dorin Luca, (2017), “A numerical solution for a closed die forging process”, Matec Web of Conferences.
  6. S. Javid Mirahmadi and etc., (2017), “Flash Gap Optimization in Precision Blade Forging”, International Journal of Mechanical Engineering and Robotics Research, vol.6, pp.200-206.
  7. Payman Abhari (2017), “Numerical simulation of cold forging process with enclosed dies to avoid folding defect in forming shape”, Mechanics and Advanced Technologies, vol. 2(80), pp. 71-77.
  8. Abdullah M.N., (2011), Increasing the efficiency of manufacturing flanged forgings on the basis of the analysis of technological schemes for forging, thesis, LGTU.

Copyright @ 2026 IRJIET. All Right Reserved.

Licensed underCreative Commons Attribution 4.0 International License.