Literature Review: Application of Nano Fly Ash in Concrete

Abstract

Literature review regarding Nano Fly Ash (NFA) to describe that application Nano Fly Ash (NFA) on mortar or concrete is workable. The results of its application can be an influence on durability, workability, and increasing concrete strength. From the compressive strength of concrete, the usage increases Nano Fly Ash (NFA) as a partial replacement for cement, the higher the compressive strength used in the concrete. So that it can be concluded utilization Nano Fly Ash (NFA) for concrete allows it to be applied or used, this is the aim of the Literature review research. Data collection is applied by reviewing several journals related to Nano Fly Ash (NFA) in the time span between 2010-2023. Journal synthesis uses several national and international journals obtained from the database Google Scholar by using the application publish or perish. The results of this Literature review research are: (1) The method for making Nano Fly Ash uses various tools ball mill (2) influence Nano Fly Ash (NFA) on durability, workability, and increasing concrete strength and (3) application Nano Fly Ash (NFA) on construction work in the civil world.

Country : Indonesia

1 Suhendro Trinugroho2 Thalia Azusena

  1. Lecturer in Civil Engineering, Engineering Faculty, Universitas Muhammadiyah Surakarta, Central Java, Indonesia
  2. Student in Civil Engineering, Engineering Faculty, Universitas Muhammadiyah Surakarta, Central Java, Indonesia

IRJIET, Volume 7, Issue 3, March 2023 pp. 150-154

doi.org/10.47001/IRJIET/2023.703022

References

  1. B. Kumar, S. Sinha, and H. Chakravarty, “Studi Pengaruh Nano-Silika terhadap Karakteristik Kekuatan dan Daya Tahan Beton Fly Ash Volume Tinggi untuk Konstruksi Perkerasan Jalan,” vol. 5, no. 6, 2019.
  2. S. U. Azunna, “Compressive strength of concrete with palm kernel shell as a partial replacement for coarse aggregate,” SN Appl. Sci., vol. 1, no. 4, 2019, doi: 10.1007/s42452-019-0334-6.
  3. M. Setiawati, M. Imaduddin, P. T. Sipil, U. M. Palembang, and L. Belakang, “Fly ash sebagai bahan pengganti semen pada beton,” vol. 5, no. 4, pp. 295–302, 2018.
  4. M. Harihanandh and M. Sivaraja, “Strength and Mechanical Properties of Nano Fly Ash Concrete,” Int. J. Adv. Eng. Technol., vol. VII, no. II, pp. 596–598, 2016, [Online]. Available: http://www.technicaljournalsonline.com/ijeat/VOLVII/IJAET VOL VII ISSUE II APRIL JUNE2016/201672104.pdf
  5. R. Mohana and S. M. Leela Bharathi, “Sustainable utilization of pre-treated and nano fly ash powder for the development of durable geopolymer mortars,” Adv. Powder Technol., vol. 33, no. 8, p. 103696, 2022, doi: 10.1016/j.apt.2022.103696.
  6. Y. R. Lee, J. T. Soe, S. Zhang, J. W. Ahn, M. B. Park, and W. S. Ahn, “Synthesis of nanoporous materials via recycling coal fly ash and other solid wastes: A mini review,” Chem. Eng. J., vol. 317, pp. 821–843, 2017, doi: 10.1016/j.cej.2017.02.124.
  7. G. Raghavendraa, S. Ojhab, S. K. Acharyab, and S. K. Palc, “Fabrication and characterization of nano Fly ash by planetary ball Milling,” Journal, Int. Innov. Mater. Sci., vol. 2, no. September, pp. 59–68, 2014.
  8. I.Desianti, Rahmaniah, and S. Zelviani, “Karakterisasi Nanosilika Dari Abu Terbang Menggunakan Metode Ultrasonic,” Jft, vol. 5, no. 2, pp. 101–108, 2018.
  9. J. Rao, P. Narayanaswami, and K. Prasad, “Thermal stability of nano structured fly ash synthesized by high energy ball milling,” Int. J. Eng. Sci. Technol., vol. 2, no. 5, pp. 284–299, 2010, doi: 10.4314/ijest.v2i5.62577.
  10. A.W. Astuti, E. Fathias, Purwanto, and H. A. Lie, “Studi Eksperimental Aplikasi Material Nano Fly Ash Terhadap Kuat Tekan Mortar Beton,” 2013.
  11. E. C. Dewi, K. T. Apasri, Purwanto, and H. A. Lie, “Pengaruh Komposisi Nano Semen Pada Perilaku Beton,” 2013.
  12. M. P. S, P. D. S. N, and P. K. U. R, “Effect on Concrete by Partial Replacement of Cement by Colloidal Nano Alumina and Fly Ash,” vol. 2, no. 5, pp. 14–19, 2016.
  13. A.Etale, N. T. Tavengwa, and V. E. Pakade, “Metal Adsorption by Coal Fly Ash : the Role of Nano-Sized Material,” Intech, pp. 9–27, 2018.
  14. A.Ali, Y. W. Chiang, and R. M. Santos, “X-Ray Diffraction Techniques for Mineral Characterization: A Review for Engineers of the Fundamentals, Applications, and Research Directions,” Minerals, vol. 12, no. 2, 2022, doi: 10.3390/min12020205.
  15. M. J. Carmichael, G. P. Arulraj, and P. L. Meyyappan, “Effect of partial replacement of cement with nano fly ash on permeable concrete: A strength study,” Mater. Today Proc., vol. 43, pp. 2109–2116, 2020, doi: 10.1016/j.matpr.2020.11.891.
  16. A.Sithara and S. A. Daniel, “Comparative Study of Nano Fly Ash Concrete and Nano Metakaolin Concrete With Normal Cement Concrete,” Int. J. Eng. Sci. Invent. Res. Dev., vol. III, no. III, pp. 156–163, 2016.
  17. A.A.Abdul-Hamead, F. M. Othman, and N. A. Hmeed, “The effect of nano fly ash on properties of cement mortar,” AIP Conf. Proc., vol. 2045, no. December, 2018, doi: 10.1063/1.5080824.
  18. L. Krishnaraj and P. T. Ravichandran, “Characterisation of ultra-fine fly ash as sustainable cementitious material for masonry construction,” Ain Shams Eng. J., vol. 12, pp. 1–11, 2021, doi: 10.1016/j.asej.2020.07.008.
  19. M. Harihanandh, K. E. Viswanathan, and A. R. Krishnaraja, “Comparative study on chemical and morphology properties of nano fly ash in concrete,” Mater. Today Proc., vol. 45, pp. 3132–3136, 2021, doi: 10.1016/j.matpr.2020.12.217.
  20. Hitesh, R. Wattal, and S. Lata, “Development and characterization of coal fly ash through low-energy ball milling,” Mater. Today Proc., vol. 47, pp. 2970–2975, 2021, doi: 10.1016/j.matpr.2021.05.204.
  21. ASTM C 618-93. "Standard Test Method for Fly Ash and Row or calcined Natural Pozzolan for Use as a mineral Admixture in Portland Cemenet Concrete," American Society for Testing od Concrete's, 1991.
  22. Andoyo. "Pengaruh Pengunaan Abu Terbang (Fly Ash) terhadap Kuat Tekan dan Serapan Air pada Mortar," 2006.