International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Effect of Vortex Finder Addition Modification on Cyclone Separator Performance in the Rice Milling Industry

Abstract

A cyclone separator is a device used to separate particulates from gas streams by applying centrifugal force. Cyclone separators are used in the rice milling industry to overcome the effect of using a blower as a machine to push the bran through the pipeline to the storage room, where the bran flies, causing pollution, and the bran is not collected properly. This study aims to examine the effect of modification of the cyclone separator on a rice mill machine using the CFD simulation method. In this study, it was found that adding the length of the vortex finder to the top had an impact on increasing the particle collection efficiency value, which was quite significant at 8.83%.

Country : Indonesia

1 Norman Iskandar2 Sulardjaka3 Muhamad Iliyas4 Hafid

  1. Mechanical Engineering, Diponegoro University, Semarang, Indonesia
  2. Mechanical Engineering, Diponegoro University, Semarang, Indonesia
  3. Mechanical Engineering, Diponegoro University, Semarang, Indonesia
  4. Research Centre for Testing Technology and Standards BRIN, Puspiptek Area Building 417, South Tangerang, Indonesia

IRJIET, Volume 7, Issue 5, May 2023 pp. 11-16

doi.org/10.47001/IRJIET/2023.705002

Full Paper
Download

References

  1. S. I. Kusumaningrum, “Pemanfaatan Sektor Pertanian Sebagai Penunjang Pertumbuhan Perekonomian Indonesia,” J. Transaksi, vol. 11, no. 1, pp. 80–89, 2019, [Online]. Available: http://ejournal.atmajaya.ac.id/index.php/transaksi/article/view/477
  2. M. Astawan and E. Febrinda, “Potensi Dedak dan Bekatul Beras Sebagai Ingredient Pangan dan Produk Pangan Fungsional,” Pangan, vol. 19, no. 1, pp. 14–21, 2010.
  3. Y. D. Istikhodriah, “Evaluasi Pemalsuan Dedak Padi dengan Penambahan Serbuk Gergaji Menggunakan Uji Fisik,” Pros. Konf. dan Semin. Nas. Teknol. Tepat Guna, pp. 266–276, 2014, [Online]. Available: https://agris.fao.org/agris-search/search.do?recordID=ID2021102014
  4. E. Yohana, M. Tauviqirrahman, D. A. Laksono, H. Charles, K. H. Choi, and M. E. Yulianto, “Innovation of vortex finder geometry (tapered in-cylinder out) and additional cooling of body cyclone on velocity flow field, performance, and heat transfer of cyclone separator,” Powder Technol., vol. 399, 2022, doi: 10.1016/j.powtec.2022.117235.
  5. L. Theodore, Air Pollution Controll Equipment, John Wiley and Sons, New Jersey, Canada, 2008.
  6. Hoffman, A., & Stein, L. (2007). Gas Cyclone and Swirl Tubes: Principles, Design, and Operation. New York: Springer.
  7. Fu, S., Zhou, F., Sun, G., Yuan, H., dan Zhu, J. (2021). Performance Evaluation of Industrial Large-Scale Cyclone Separator with Novel Vortex Finder. Advanced Powder Technology, 32(3), 931–939.
  8. Elsayed, K. dan Lacor, C. (2012). The Effect of the Dust Outlet Geometry on The Performance and Hydrodynamics of Gas Cyclones. Computers and Fluids, 68, 134–147.
  9. Anandharamakrishnan, C. &Ishwarya, P. (2015). Spray Drying Techniques for Food Ingredient Encapsulation. 1st edition. West Sussex, UK: John Wiley & Sons, Ltd.
  10. Zhao, B., Su, Y. and Zhang, J. (2006). Simulation Of Gas Flow Pattern and Separation Efficiency in Cyclone with Conventional Single And Spiral Double Inlet Configuration. Chemical Engineering Research and Design, 84(12 A), 1158–1165.
  11. Yohana, E., Tauviqirrahman, M., Yusuf, B., Choi, K. H., Paramita, V. (2021). Effect of Vortex Limiter Position and Metal Rod Insertion on The Flow Field, Heat Rate, and Performance of Cyclone Separator. Powder Technology, 377, 464–475.
  12. Elsayed, K. dan Lacor, C. (2011). Numerical Modeling of The Flow Field and Performance in Cyclones of Different Cone-Tip Diameters. Computers and Fluids, 51(1), 48–59.
  13. M. Rhodes, Introduction to Particle Technology, John Wiley and Sons, West Sussex, England, 2008.
  14. Erol, H. I., Turgut, O. dan Unal, R. (2019). Experimental and Numerical Study of Stairmand Cyclone Separators: A Comparison of The Results of Small-Scale and Large-Scale Cyclones. Heat and Mass Transfer, 55(8), 2341–2354.
  15. Wu, X. dan Chen, X. (2019). Effects of Vortex Finder Shapes on The Performance of Cyclone Separators. Environmental Progress and Sustainable Energy. 38(5), 1–7.
  16. Ficici, F., Vedat, A. dan Kapsiz, M. (2010). The Effects of Vortex Finder on The Pressure Drop in Cyclone Separators. International Journal of Physical Sciences, 5(6), 804–813.
  17. Tian, J., Ni, L., Song, T., Zhao, J. (2020). CFD Simulation of Hydrocyclone-Separation Performance Influenced by Reflux Device and Different Vortex-Finder Lengths. Separation and Purification Technology, 233, 116013.
  18. Raoufi, A., Shams, M., Farzaneh, M., Ebrahimi, R. (2008). Numerical Simulation and Optimization of Fluid Flow in Cyclone Vortex Finder. Chemical Engineering and Processing: Process Intensification, 47(1), 128–137.
  19. Lim, K. S., Kim, H. S. and Lee, K. W. (2004). Characteristics of the Collection Efficiency for A Cyclone with Different Vortex Finder Shapes. Journal of Aerosol Science, 35(6), 743–754.
  20. Fatahian, E., Fatahian, H., Hosseini, E., dan Ahmadi, G. (2021). A Low-Cost Solution for the Collection of Fine Particles in Square Cyclone: A Numerical Analysis, Powder Technology, 387, 454–465.
  21. B. Pei, L. Yang, K. Dong, Y. Jiang, X. Du, B. Wang, The effect of cross-shaped vortex finder on the performance of cyclone separator, Powder Technol. 313 (2017) 135–144.
  22. Zhou, F., Sun, G., Han, X., Zhang, Y., Bi, W. (2018). Experimental and CFD Study on Effects Of Spiral Guide Vanes On Cyclone Performance. Advanced Powder Technology, 29(12), 3394–3403.
  23. Zhang, Y., Jin, R., Dong, S., Wang, Y., Dong, K., Wei, Y., Wang, B. (2021) Heterogeneous Condensation Combined with Inner Vortex Broken Cyclone to Achieve High Collection Efficiency of Fine Particles and Low Energy Consumption. Powder Technology, 382, 420–430.
  24. Safikhani, H., Rafiee, M. and Ashtiani, D. (2021). Numerical Study of Flow Field in New Design Cyclones with Different Wall Temperature Profiles: Comparison with Conventional Ones. Advanced Powder Technology.

Copyright @ 2026-2017 IRJIET. All Right Reserved.

Developed by Byzero Technologies