International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Analysis of Energy Harvesting for WSN in 5G

Abstract

The Internet of Things (IoT) network used for gathering and efficient manage- ment of various information from wireless sensor network. As these sensor nodes are deployed at various remote region the energy source are more commonly battery, as per load of communication the nodes become dead node after drain out its energy. In such condition the replacing of battery is a crucial even impossible task. So to overcome such problems the Energy harvesting concept is used. The RF energy is harvested using large aperture power receiving antennae and this power is converted into DC power to recharge battery. Here a performance analysis of Energy Harvesting for IoT network namely packet loss and throughput is done by using discrete event simulator NS3. In this thesis numerical results are obtained for packet loss and throughput for various scenarios. The effect of variable energy arrival rate, number of nodes, variable packet arrival rate, mobility, on off application of nodes over packet loss and throughput of node is analysed.

Country : India

1 Maske Ashish Mahadev2 Dr. D.B. Salunke3 Dr. Alok Agrawal

  1. Department of Electronics and telecommunication Engineering, SJJT University Jhunjhunu, Rajsthan, India
  2. Department of Electronics and telecommunication Engineering JSPM Collage of Engg., Pune University, Maharashtra, India
  3. Head Department of Electronics and communication Engineering, Aravali Collage of Engg. & Management, Faridabad University, Faridabad, India

IRJIET, Volume 7, Special Issue of ICRTET- 2023 pp. 186-190

IRJIET.ICRTET38

Full Paper
Download

References

  1. Ozgur B. Akan, Oktay Cetinkaya, Caglar Koca, and Mustafa Ozger, “Internet of Hybrid Energy Harvesting Things”, IEEE INTERNET OF THINGS JOURNAL, VOL. 5, NO. 2, APRIL 2018.
  2. Lakshmikanth Guntupalli, Mikael Gidlund, and Frank Y. Li,, “An On Demand Energy Requesting Scheme for Wireless Energy Harvesting Powered IoT Networks”, IEEE INTERNET OF THINGS JOURNAL, VOL. 5, NO. 4, AUGUST 2018.
  3. M. King, B. Zhu, and S. Tang, “ Optimal path planning,” Mobile Robots, vol. 8, no. 2, pp. 520-531, March 2001.
  4. H. Simpson, Dumb Robots, 3rd ed., Springfield: UOS Press, 2004, pp.6-9.
  5. M. King and B. Zhu, “Gaming strategies,” in Path Planning to the West, vol. II, S. Tang and M. King, Eds. Xian: Jiaoda Press, 1998, pp. 158-176.
  6. B. Simpson, et al, “Title of paper goes here if known,” unpublished.
  7. J.-G. Lu, “Title of paper with only the first word capitalized,” J. Name Stand. Abbrev., in press.
  8. Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electron spectroscopy studies on magneto-optical media and plastic substrate interface,” IEEE Translated J. Magn. Japan, vol. 2, pp. 740-741, August 1987 [Digest 9th Annual Conf. Magnetics Japan, p. 301, 1982].
  9. M. Young, The Technical Writer’ s Handbook, Mill Valley, CA: University Science, 1989.
  10. S. Chen, H. Xu, D. Liu, B. Hu, and H. Wang, “A vision of IoT: Applications, challenges, and opportunities with China perspective”, IEEE Internet Things J.,vol. 1, no. 4, Aug. 2014.
  11. H. Li, G. Zhang, R. Ma, and Z. You, “Design and experimental evaluation on an advanced multisource energy harvesting system for wireless sensor nodes”, Sci.World J., vol. 2014, Jun. 2014.
  12. D. Carli, D. Brunelli, L. Benini, and M. Ruggeri, “An effective multi- source energy harvester for low power applications” ,in Proc. IEEE Design Autom. Test Eur., Grenoble, France, Mar. 2011.
  13. PeterD.Lund n, Juuso Lindgren, Jani Mikkola, Jyri Salpakari, “ Review of en- ergy system flexibility measures to enable high levels of variable renewable electricity”, Renewable and Sustainable Energy Reviews, 2015.
  14. Fayaz Akhtar, Mubashir Husain Rehmani, “Energy replenishment using renew- able and traditional energy resources for sustainable wireless sensor networks: A review”, Renewable and Sustainable Energy Reviews, 2015.
  15. J. Jessen, M. Venzke, and V. Turau, “Design considerations for a universal smart energy module for energy harvesting in wireless sensor networks”, Solu-tions Embedded Syst. (WISES), Jul. 2011.
  16. J. W. Matiko, N. J. Grabham, S. P. Beeby, and M. J. Tudor, “ Review of the application of energy harvesting in buildings”, Meas. Sci. Technol., vol. 25, Sep. 2013.
  17. “The ns-3 network simulator”, http://www.nsnam.org/
  18. He Wu, Sidharth Nabar and Radha Poovendran, “An Energy Framework for the Network Simulator 3 (ns-3)”, SIMU Tools 2011 March, Barcelona, Spain.
  19. Q. Chen, S. Kanhere, and M. Hassan, “Analysis of per-node traffic load in multi- hop wireless sensor networks”, IEEE Trans. Wireless Commun., Feb. 2009.[20]              C.-S. Ok, S. Lee, P. Mitra, and S. Kumara, “Distributed energy balanced routing for wireless sensor networks”, Comput. Ind. Eng., vol. 57, 2009.
  20. J. Ren et al., “Lifetime and energy hole evolution analysis in data gathering wireless sensor networks”, IEEE Trans. Ind. Informat., vol. 12, no. 2, Apr. 2016.

Copyright @ 2026-2017 IRJIET. All Right Reserved.

Developed by Byzero Technologies