International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Optimization of Process Parameters for Tool Wear in Turning Process Using Al Alloy

Farhat KowserPG Scholar, Department of Mechanical Engineering, Galaxy Global Educational Trust Group of Institutions Dinarpur (Ambala), IndiaDr. Sorabh GuptaProfessor & Director, Galaxy Global Educational Trust Group of Institutions Dinarpur (Ambala), IndiaEr. Didar SinghAssistant Professor, Department of Mechanical Engineering, Galaxy Global Educational Trust Group of Institutions Dinarpur (Ambala), India

Vol 8 No 10 (2024): Volume 8, Issue 10, October 2024 | Pages: 139-146

International Research Journal of Innovations in Engineering and Technology

OPEN ACCESS | Research Article | Published Date: 18-10-2024

doi Logo doi.org/10.47001/IRJIET/2024.810019

pdf iconFull Text PDF
Abstract

This study was more focused upon the determination of most influencing input parameter for desirable or undesirable output, apart from it the main aim was selection of optimal parameters for improved surface finish and high productivity. The approach used for the optimization of the process capabilities for oil & Gas components machining will be described. These components are machined by turning of stainless steel castings work pieces. For this purpose, a proper Design of Experiments (DOE) plan has been designed and executed: as output of the experimentation, data about tool wear have been collected. The DOE has been designed starting from the cutting speed and feed values recommended by the tools manufacturer; the depth of cut parameter has been maintained as a constant. Wear data has been obtained by means the observation of the tool flank wear under an optical microscope: the data acquisition has been carried out at regular intervals of working times. The optimization approach used is a multi-objective optimization, which minimizes the production time and the number of cutting tools used, under the constraint on a defined flank wear level.

Keywords

Optimization, Turning, Tool wear, Al alloy


Citation of this Article

Farhat Kowser, Dr. Sorabh Gupta, & Er. Didar Singh. (2024). Optimization of Process Parameters for Tool Wear in Turning Process Using Al Alloy. International Research Journal of Innovations in Engineering and Technology - IRJIET, 8(10), 139-146. Article DOI https://doi.org/10.47001/IRJIET/2024.810019

Licence Copyright (c) 2026 International Research Journal of Innovations in Engineering and Technology creative common licence This work is licensed under Creative common Attribution Non Commercial 4.0 Internation Licence
References
  1. Gopal, M. “The Effect of Machining Parameters and Optimization of Temperature Rise in Turning Operation of Aluminium-6061 Using RSM and Artificial Neural Network”, Periodica Polytechnica Mechanical Engineering, 65(2), pp. 141–150, 2021. https://doi.org/10.3311/PPme.16625
  2. S.P. Palaniappan, K. Muthukumar, R.V. Sabariraj, S. Dinesh Kumar, T. Sathish, CNC turning process parameters optimization on Aluminium 6082 alloy by using Taguchi and ANOVA, Materials Today: Proceedings, Volume 21, Part 1, 2020, Pages 1013-1021, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2019.10.053.
  3. Govindan P and Vipindas M P, “Surface Quality Optimizationin Turning Operations Using Taguchi Method—A Review”, International Journal of Mechanical Engineering and Robotics Research, Vol. 3, No.1, pp.89-102, 2014.
  4. Vipin Kumar Sharma et al. “Response Surface Methodology & Taguchi Techniques to Optimization Of C.N.C Turning Processes”, International Journal of Production Technology and Management, Vol. 1, No. 1, pp.13-31, 2010.
  5. W.H. Yang, Y.S. Tarng, “Design Optimization of Cutting Parameters for Turning Operations Based on the Taguchi Method”, Journal of Materials Processing Technology, 84, pp. 122–129, 1998.
  6. Harish Kumar, Mohd. Abbas, Dr. Aas Mohammad and Hasan Zakir Jafri, “Optimization of Cutting Parameters in CNC Turning”, International Journal of Engineering Research and Applications, Vol.3, Issue3, pp.331-334, 2013.
  7. Ashvin J. Makadiaand J. I. Nanavati, “Optimization of Machining Parameters for Turning Operations Based on Response Surface Methodology”, Measurement 46, pp.1521–1529, 2013.
  8. Chandan Kumar, Mohammad Nehal Akhtar and Mohd Ziaul Haq, “Optimization of Machining Parameters in a Turning Operation of AISI-202 Austenitic Stainless Steel to Minimize Surface Roughness”, International Research Journal of Engineering and Technology, Vol.04, Issue 05, pp.761-765, 2017.
  9. L B Abhang and M Hameedullah, “Optimization of Machining Parameters in Steel Turning by Taguchi Method”, International Conference on Modeling, Optimization and Computing, Procedia Engineering 38, pp.40 –48,2012.
  10. Suraj R. Jadhav and Aamir M. Shaikh, “Optimization of Process Parameters for CNC Turning using Taguchi Methods for EN-24 Alloy Steel with Coated/Uncoated Tool Inserts”, International Journal of Advanced Engineering, Management and Science, Vol. 2, Issue 11, pp.1923-1931, 2016.
  11. S. Thamizhmanii, S. Saparudin and S. Hasan, “Analyses of surface roughness by turning process using Taguchi method” Journal of Achievements in Materials and Manufacturing Engineering, Vol. 20, Issue1-2, pp.503-506, 2007.
  12. Puneet Saini, Shanti Parkash and Devender Choudhary, “Experimental Investigation of Machining Parameters for Surface Roughness in High Speed CNC Turning of EN-24 Alloy Steel Using Response Surface Methodology”, International Journal of Engineering Research and Applications, Vol. 4, Issue 5 Version 7, pp.153-160, 2014.
  13. D. Philip Selvaraj, P. Chandramohan, “Optimization of Surface Roughness of AISI-304 Austenitic Stainless Steel in Dry Turning Operation Using Taguchi Design Method”, Journal of Engineering Science and Technology, Vol. 5, No.3, pp.293–301, 2010.
  14. D. Rajasekhar Reddy and A V Hari Babu, “Multi-Objective Optimization in Turning of EN-31 Steel Using Taguchi Based Grey Relational Analysis”, International Journal of Current Engineering and Technology, Vol. 6, No.4, pp.1317-1322, 2016.
  15. Mohd. Shadab Siddique, Mohammad Nehal Akhtar, Mohammad Wajahat Iqbal, Nizam Beg and Mohd Ziaul Haq, “Turning Parameter Optimization for Material Removal Rate of AISI- 4140 Alloy Steel by Taguchi Method”, International Research Journal of Engineering and Technology, Vol.04, Issue 06, pp.848-854, 2017.
  16. Muammer Nalbant, Hasan Gokkaya, Ihsan Toktas and Gokhan Sur, “The Experimental Investigation of the Effects of Uncoated, PVD and CVD Coated Cemented Carbide Inserts and Cutting Parameters on Surface Roughness in CNC Turning and Its Prediction Using Artificial Neural Networks”, Robotics and Computer-Integrated Manufacturing 25, pp.211–223, 2009.
  17. H. K. Dave, L.S. Patel and H.K. Raval, “Effect of Machining Conditions on MRR and Surface Roughness During CNC Turning of Different Materials Using TiN Coated Cutting Tools–A Taguchi Approach”, International Journal of Industrial Engineering Computations 3, pp.925–930, 2012.
  18. Nithyanandhan T, Kannakumar R, Suresh Kumar P and Vijayakumar NS, “Optimizing the Process Parameters on Tool Wear of Tungsten Carbide Insert When Machining of AISI-304 Stainless Steel Material”, International Journal of Scientific Research and Education, Vol.2, Issue11, pp.2463-2477, 2014.
  19. Santosh Kumar, B.S Pabla and Jatinder Madan, “Optimization of Machining Parameters in Turning EN-45 Steel Using Plain Carbide Tools”, International Journal of Scientific Research in Science, Engineering and Technology, Vol.3, Issue 6, 2017.
  20. Rahul R Deshpande, Reena Pant, “Optimization of Process Parameters for CNC Turning Using Taguchi Methods for EN-8 Alloy Steel with Coated/Uncoated Tool Inserts”, International Research Journal of Engineering and Technology, Vol.04, Issue11, pp.180-188, 2017.
  21. Mittal P Brahmbhatt, Ankit R Patel, Priyank and S Panchal, “Optimization of Cutting Parameters for Dry Turning of EN-9 Steel with MTCVD Multicoated Carbide Insert Using Taguchi Method”, International Journal of Advance Engineering and Research Development, Vol.1, Issue5, 2014.
  22. Ravi Aryan, Francis John, Santosh Kumar and Amit Kumar, “Optimization of Turning Parameters of AL-Alloy 6082 using Taguchi Method”, International Journal of Advance Research and Innovation, Vol. 5, Issue2, pp.268-275, 2017.
  23. Praveen Kumar, Abhijith, Akhil Anil Kumar and Ajay Parthan, “Optimization of Turning Process Parameters for EN-31 Steel Using Taguchi Method”, International Journal of Research in Engineering and Technology, Vol.5, Issue 4, pp.23-28, 2017.
  24. B Kumaragurubaran, P Gopal, T Senthil Kumar, M Prasanna Mugunthan and N H Mohamed Ibrahim, “Optimization of Turning Parameters of EN-9 Steel Using Design of Experiments Concepts”, International Journal of Mechanical Engineering and Robotics Research, Vol.2, No.3, pp.182-190, 2013.
  25. Meenu Sahu and Komesh Sahu, “Optimization of Cutting Parameters on Tool Wear, Work piece Surface Temperature and Material Removal Rate in Turning of AISI-D2 Steel”, International Journal of Advanced Mechanical Engineering, Vol.4, No.3, pp.291-298, 2014.
  26. Turgay Kıvak “Optimization of Surface Roughness and Flank Wear Using the Taguchi Method in Milling of Hadfield Steel with PVD And CVD Coated Inserts”, Measurement 50, pp.19–28, 2014.
  27. R. Suresh, S. Basavarajappa and G.L. Samuel, “Some Studies on Hard Turning of AISI-4340 Steel Using Multilayer Coated Carbide Tool”, Measurement 45, pp.1872–1884, 2012.
  28. Ashok Kumar Sahoo and Bidyadhar Sahoo, “Experimental Investigations on Machinability Aspects in Finish Hard Turning of AISI-4340 Steel Using Uncoated and Multilayer Coated Carbide Inserts”, Measurement 45, pp.2153–2165, 2012.
  29. M. Kaladhar, K. Venkata Subbaiah and C H. Srinivasa Rao, “Optimization of Surface Roughness and Tool Flank Wear in Turning of AISI-304 Austenitic Stainless Steel with CVD Coated Tool”, Journal of Engineering Science and Technology, Vol. 8, No. 2, pp. 165 – 176, 2013.
  30. Manish Chaudhari, K Karunamurthy, “Determining the Effect of Coated and Uncoated Tool Insert during Turning of EN-31 Steel”, International Journal of Mechanical Engineering and Technology, Vol. 8, Issue 11, pp.1009–1019, 2017.
  31. Varaprasad Bh, Srinivasa Rao.Ch, P.V. Vinay, “Effect of Machining Parameters on Tool Wear in Hard Turning of AISI-D3 Steel”, 12th Global Congress on Manufacturing and Management, Procedia Engineering 97, pp.338 –345, 2014.
  32. Dr. C. J. Rao, Dr. D. Nageswara Rao, P. Srihari, “Influence of Cutting Parameters on Cutting Force and Surface Finish in Turning Operation”, International Conference on Design and Manufacturing, Procedia Engineering 64, pp.1405 –1415, 2013.
  33. G. Basmaci and M. Ay ,“Optimization of Cutting Parameters, Condition and Geometry in Turning AISI-316L Stainless Steel Using the Grey-Based Taguchi Method”, Special Issue of the 6th International Congress and Exhibition, Vol.131, No.3, pp.354-358, 2016.
  34. Satish Chinchanikar and S.K. Choudhury, “Effect of Work Material Hardness and Cutting Parameters on Performance of Coated Carbide Tool When Turning Hardened Steel: An Optimization Approach”, Measurement 46, pp.1572–1584, 2013.
  35. Sudhansu Ranjan Das, Amaresh Kumar and Debabrata Dhupal, “Experimental Investigation on Cutting Force and Surface Roughness in Machining of Hardened AISI-52100 Steel Using C-B-N Tool”, International Journal of Machining and Machinability of Materials, Vol.18, Nos.5/6, pp.501-521, 2016.
  36. M.Y. Noordin, V.C. Venkatesh, S. Sharif, S. Elting and A. Abdullah, “Application of Response Surface Methodology in Describing the Performance of Coated Carbide Tools When Turning AISI-1045 Steel”, Journal of Materials Processing Technology 145, pp.46–58, 2004.
  37. Gaurav Bartarya, S.K. Choudhury, “Effect of Cutting Parameters on Cutting Force and Surface Roughness during Finish Hard Turning AISI-52100 Grade Steel”, 5th CIRP Conference on High Performance Cutting, Procedia CIRP 1, pp.651–656, 2012.
  38. B. Padma, B. Satish Kumar, N. Gopikrishna, “Optimization of Turning Process Parameters on EN-9 Carbon Steel Using Grey Relational Analysis”, International Journal of Innovations in Engineering Research and Technology, Vol. 4,Issue1,pp.6-10,2017.
  39. Suha K. Shihab, Zahid A. Khan, Aas Mohammad and Arshad Noor Siddiqueed, “RSM Based Study of Cutting Temperature during Hard Turning with Multilayer Coated Carbide Insert”, 3rd International Conference on Materials Processing and Characterization, Procedia Materials Science 6, pp.1233–1242, 2014.
  40. G. Harinath Gowd, M. Venugopal Goud, K. Divya Theja And M. Gunasekhar Reddy, “Optimal Selection of Machining Parameters in CNC Turning Process of EN-31 Using Intelligent Hybrid Decision Making Tools”, 12th Global Congress on Manufacturing and Management, Procedia Engineering 97, pp.125–133, 2014.
  41. Harsh Y Valeraa and Sanket N Bhavsar, “Experimental Investigation of Surface Roughness and Power Consumption in Turning Operation ofEN-31 Alloy Steel”, 2nd International Conference on Innovations in Automation and Mechatronics Engineering, Procedia Technology 14,pp.528 –534,2014.
  42. L. B. Abhang and M. Hameedullah, “Power Prediction Model for Turning EN-31 Steel Using Response Surface Methodology”, Journal of Engineering Science and Technology Review 3, 1, pp.116-122, 2010.
  43. Carmita Camposeco-Negrete, “Optimization of Cutting Parameters for Minimizing Energy Consumption in Turning of AISI-6061 T6 Using Taguchi Methodology and ANOVA”, Journal of Cleaner Production xxx, pp.1-9, 2013.
  44. Mariyeh Moradnazhad and Hakki Ozgur Unver, “Energy Efficiency of Machining Operations: A Review”, Journal of Engineering Manufacture, pp.1-19, 2016.
  45. Sofiane Berkania, Mohamed Athmane Yallese, Lakhdar Boulanouar and Tarek Mabrouki, “Statistical Analysis of AISI-304 Austenitic Stainless-Steel Machining Using Ti (C, N)/Al2O3/TiN CVD Coated Carbide Tool”, International Journal of Industrial Engineering Computations 6, pp.539-552, 2015.
  46. Andrew A. Erameh, Nurudeen A. Raji, Rasheed O. Durojaye and Abiodun A. Yussouff, “Process Capability Analysis of a Centre Lathe Turning Process”, Scientific Research Publishing Engineering, 8, pp.79-85,2016.
  47. Arun Kumar, Sukhdeep S. Dhami, “A Review on Modeling of Temperature Distribution at Tool Workpiece Interface during Machining Process”, International Journal of Innovative Research in Science, Engineering and Technology, Vol.6, Issue8, pp.16549-16558, 2017.

Copyright @ 2026 IRJIET. All Right Reserved.

Licensed underCreative Commons Attribution 4.0 International License.