Design of Harmonic Filter for AL-Tahady Electro Static Precipitator System

Abstract

The use of non-linear loads, such as electro static precipitator (ESP) and variable speed drive (VSD), draws much distorted currents and voltages. They lead to generation of voltage/current harmonics and consume reactive power. Al-Tahady ESP had been designed and manufactured at Al-Zawraa state company as an air pollution control system. This paper presents the solution for this problem, firstly a separation of power supplies led to proper operation of the system, this secondly encourages to think of harmonics generated by variable speed drive. The three-phase harmonic filter was used to compensate harmonics generated by non-linear load (electro static precipitator and variable speed driver that derives the fan). The instantaneous harmonic reduction theory that uses Fourier series was used to design the harmonic filter. Power SIMulation (PSIM) and MATLAB have verified the harmonic distortion and the active filter control scheme.

Country : Iraq

1 Taha N. DeKheel2 Mohammed O. Mustafa3 Mehdi J. Marie

  1. Electrical Engineering Department, University of Mosul, Mosul, Iraq
  2. Electrical Engineering Department, University of Mosul, Mosul, Iraq
  3. Al-Zawraa State Company, Ministry of Industry and Minerals, Baghdad, Iraq

IRJIET, Volume 8, Issue 2, February 2024 pp. 88-95

doi.org/10.47001/IRJIET/2024.802013

References

  1. A.Cantini, L. Leoni, F. De Carlo, M. Salvio, C. Martini, and F. Martini, “Technological energy efficiency improvements in cement industries,” Sustain., vol. 13, no. 7, 2021, doi: 10.3390/su13073810.
  2. S. Rampuri, “Study and Analysis of Occupational & Health Diseases in Cement Industries,” Int. J. Adv. Res. Dev., vol. 2, pp. 1–7, 2017, [Online]. Available: www.ijarnd.com
  3. B. K. Bose, “Power Electronics in Smart Grid and Renewable Energy Systems,” Proc. IEEE, vol. 105, no. 11, pp. 2007–2010, 2017, doi: 10.1109/JPROC.2017.2752538.
  4. O. Krishan and S. Suhag, “An updated review of energy storage systems: Classification and applications in distributed generation power systems incorporating renewable energy resources,” Int. J. Energy Res., vol. 43, no. 12, pp. 6171–6210, 2019, doi: 10.1002/er.4285.
  5. M. Bajaj and A. K. Singh, “Grid integrated renewable DG systems: A review of power quality challenges and state-of-the-art mitigation techniques,” Int. J. Energy Res., vol. 44, no. 1, pp. 26–69, 2020, doi: 10.1002/er.4847.
  6. L. E. Elkraft, “Variable Frequency Drives and Harmonic Abatement Techniques,” IEEE-500, 2010, [Online]. Available: www.ijsr.net
  7. B. Singh and R. Singh, “Design of Shunt Active Power Filter to Eliminate Harmonics Generated by CFL,” Int. J. Recent Res. Electr. Electron. Eng., vol. 2, no. 3, pp. 55–62, 2015.
  8. Y. Asadi, M. Eskandari, M. Mansouri, S. Chaharmahali, M. H. Moradi, and M. S. Tahriri, “Adaptive Neural Network for a Stabilizing Shunt Active Power Filter in Distorted Weak Grids,” Appl. Sci., vol. 12, no. 16, 2022, doi: 10.3390/app12168060.
  9. A.F. Zobaa and S. H. E. Abdel Aleem, “A new approach for harmonic distortion minimization in power systems supplying nonlinear loads,” IEEE Trans. Ind. Informatics, vol. 10, no. 2, pp. 1401–1412, 2014, doi: 10.1109/TII.2014.2307196.
  10. L. A. Morân, “A simple and low-cost control strategy for active power filters connected in cascade,” IEEE Trans. Ind. Electron., vol. 44, no. 5, pp. 621–629, 1997, doi: 10.1109/41.633456.
  11. E. P. Engineering, “Design and Simulation of Active Harmonic Filter for Reducing Harmonic Distortion and Improving Power Factor in Industrial Load,” vol. 03, no. 10, pp. 1934–1940, 2014.
  12. B. Singh, K. Al-haddad, S. Member, and A. Chandra, “A Review of Active Filters for Power Quality Improvement Bhim,” October, vol. 46, no. 5, pp. 960–971, 1999.
  13. I.Colak, E. Kabalci, G. Fulli, and S. Lazarou, “A survey on the contributions of power electronics to smart grid systems,” Renew. Sustain. Energy Rev., vol. 47, no. 1, pp. 562–579, 2015, doi: 10.1016/j.rser.2015.03.031.
  14. P. Asia, “The Evolution of Emissions Control Technologies to Meet Lower Limits,” 2017.
  15. C. E. Division, “Spark and Its Effect on Electrostatic Precipitator,” no. June, pp. 1–12, 2006.
  16. A.T. De Almeida, F. J. T. E. Ferreira, and D. Both, “Technical and economical considerations in the application of variable speed drives with electric motor systems,” Conf. Rec. Ind. Commer. Power Syst. Tech. Conf., vol. 41, no. 1, pp. 136–144, 2004, doi: 10.1109/icps.2004.1314992.
  17. B. Monsen, K. S. Rongve, T. Laegreid, and C. Gutscher, “Åsgard Subsea Gas Compression-Technology Qualification Testing With High-Speed Vsd and Very Long Step-Out Cable,” IEEE Trans. Ind. Appl., vol. 50, no. 2, pp. 1552–1561, 2014, doi: 10.1109/TIA.2013.2293912.
  18. M. H. Rashid, Power Electronics Devices, Circuits & Applications, 4th Edition. 2014.