International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Preparation of Electrolyte Based on YSZ Material at the Green Boundary of NiO-YSZ

Muhammad Faesal FebriandyonoMechanical Engineering, Diponegoro University, Prof. Sudharto Street, Tembalang-Semarang 50275, IndonesiaSulistyoMechanical Engineering, Diponegoro University, Prof. Sudharto Street, Tembalang-Semarang 50275, IndonesiaMohammad TauviqirrahmanMechanical Engineering, Diponegoro University, Prof. Sudharto Street, Tembalang-Semarang 50275, IndonesiaRayhan CalistaMechanical Engineering, Diponegoro University, Prof. Sudharto Street, Tembalang-Semarang 50275, IndonesiaTatagraha RahmandaMechanical Engineering, Diponegoro University, Prof. Sudharto Street, Tembalang-Semarang 50275, IndonesiaFachrizal Radya MahendraMechanical Engineering, Diponegoro University, Prof. Sudharto Street, Tembalang-Semarang 50275, Indonesia

Vol 9 No 1 (2025): Volume 9, Issue 1, January 2025 | Pages: 170-174

International Research Journal of Innovations in Engineering and Technology

OPEN ACCESS | Research Article | Published Date: 03-02-2025

doi Logo doi.org/10.47001/IRJIET/2025.901021

pdf iconFull Text PDF
Abstract

The development of alternative energy technologies, particularly based on fuel cells, has become a primary focus in material research for energy applications. Solid Oxide Fuel Cells (SOFCs) are promising due to their high efficiency, fuel flexibility, and relatively low environmental impact. In SOFC systems, the electrolyte plays a key role in the oxygen ion conduction from the cathode to the anode. Yttria-Stabilized Zirconia (YSZ) is a widely researched electrolyte material due to its superior ionic conductivity at high temperatures, chemical stability, and thermal compatibility with other materials in SOFCs. However, optimizing the performance of YSZ-based electrolytes at intermediate-to-low operating temperatures remains a challenge. This research explores a new approach for fabricating YSZ electrolytes with an emphasis on optimizing the green boundary between NiO-YSZ composites, which significantly affects ionic conductivity and electrochemical performance. A spin coating method was employed to create YSZ layers with controlled thickness and homogeneity. The addition of polyethylene glycol (PEG) as a binder enhanced slurry viscosity and layer uniformity. Scanning Electron Microscopy (SEM) analysis revealed dense, crack-free, and uniform YSZ layers with submicron crystalline grains, contributing to improved ionic conductivity and mechanical stability. The findings suggest that optimizing green boundary structures can enhance the overall performance of SOFCs, particularly in medium-temperature applications, making significant contributions to more efficient fuel cell technology development.

Keywords

Spin Coating, Electrolyte, SOFC, Yttria Stabilized Zirconia, SEM


Citation of this Article

Muhammad Faesal Febriandyono, Sulistyo, Mohammad Tauviqirrahman, Rayhan Calista, Tatagraha Rahmanda, & Fachrizal Radya Mahendra. (2025). Preparation of Electrolyte Based on YSZ Material at the Green Boundary of NiO-YSZ. International Research Journal of Innovations in Engineering and Technology - IRJIET, 9(1), 170-174. Article DOI https://doi.org/10.47001/IRJIET/2025.901021

Licence Copyright (c) 2026 International Research Journal of Innovations in Engineering and Technology creative common licence This work is licensed under Creative common Attribution Non Commercial 4.0 Internation Licence
References
  1. T. Limbani and A. Mahesh, “Study of brush coating and spin coating on stannic oxide thin film for the electron transport layer in a perovskite solar cell,” Nano-Structures and Nano-Objects, vol. 35, p. 101010, 2023, doi: 10.1016/j.nanoso.2023.101010.
  2. C. J. Li, C. X. Li, and X. J. Ning, “Performance of YSZ electrolyte layer deposited by atmospheric plasma spraying for cermet-supported tubular SOFC,” Vacuum, vol. 73, no. 3–4, pp. 699–703, 2004, doi: 10.1016/j.vacuum.2003.12.096.
  3. D. Salehzadeh, P. Marashi, and Z. Sadeghian, “Electrophoretic deposited Ni(OH)2-YSZ and NiO-YSZ nanocomposite coatings, microstructural and electrochemical evaluation,” Surf. Coatings Technol., vol. 381, no. December 2018, p. 125155, 2020, doi: 10.1016/j.surfcoat.2019.125155.
  4. C. X. Li, C. J. Li, and L. J. Guo, “Effect of composition of NiO/YSZ anode on the polarization characteristics of SOFC fabricated by atmospheric plasma spraying,” Int. J. Hydrogen Energy, vol. 35, no. 7, pp. 2964–2969, 2010, doi: 10.1016/j.ijhydene.2009.05.041.
  5. Y. Itagaki, S. Watanabe, T. Yamaji, M. Asamoto, H. Yahiro, and Y. Sadaoka, “Electrophoretic deposition of bi-layered LSM/LSM-YSZ cathodes for solid oxide fuel cell,” J. Power Sources, vol. 214, pp. 153–158, 2012, doi: 10.1016/j.jpowsour.2012.04.079.
  6. C. J. Li, C. X. Li, Y. Z. Xing, M. Gao, and G. J. Yang, “Influence of YSZ electrolyte thickness on the characteristics of plasma-sprayed cermet supported tubular SOFC,” Solid State Ionics, vol. 177, no. 19-25 SPEC. ISS., pp. 2065–2069, 2006, doi: 10.1016/j.ssi.2006.03.004.
  7. F. Yildirim, C. Timurkutluk, and B. Timurkutluk, “Optimizing infiltration parameters of nanostructured anode electrode in solid oxide fuel cells,” Ceram. Int., vol. 49, no. 14, pp. 23642–23653, 2023, doi: 10.1016/j.ceramint.2023.04.199.
  8. B. Gao, Z. Liu, S. Ji, and Q. Ao, “Fabrication of a YSZ electrolyte layer via co-pressing/co-sintering for tubular NiO-YSZ anode-supported SOFCs,” Mater. Lett., vol. 323, no. May, p. 132547, 2022, doi: 10.1016/j.matlet.2022.132547.
  9. R. E. Mistler, “The principles of tape casting and tape casting applications,” Ceram. Process., pp. 147–173, 1995, doi: 10.1007/978-94-011-0531-6_5.
  10. C. Fiori and G. De Portu, “Tape Casting: a Technique for Preparing and Studying New Materials.,” Br. Ceram. Proc., no. 38, pp. 213–225, 1986.
  11. Y. Chen et al., “Interface and grain boundary degradation in LSM-YSZ composite Solid Oxide Fuel Cell cathodes operated in humidified air,” J. Power Sources, vol. 438, no. August, p. 227043, 2019, doi: 10.1016/j.jpowsour.2019.227043.
  12. G. Chasta, U. Bhakar, D. Suthar, Himanshu, R. Lamba, and M. S. Dhaka, “Impact of ethyl cellulose variation on microstructural and electrochemical properties of spin coated YSZ electrolyte thin films for SOFCs: Slurry composition evolution,” Ceram. Int., vol. 49, no. 1, pp. 1298–1307, 2023, doi: 10.1016/j.ceramint.2022.09.109.
  13. J. E. Hong, S. Ida, and T. Ishihara, “Effects of transition metal addition on sintering and electrical conductivity of La-doped CeO2 as buffer layer for doped LaGaO 3 electrolyte film,” Solid State Ionics, vol. 262, pp. 374–377, 2014, doi: 10.1016/j.ssi.2013.11.049.
  14. Y. Lim, H. Lee, J. Park, and Y. B. Kim, “Low-temperature constrained sintering of YSZ electrolyte with Bi2O3 sintering sacrificial layer for anode-supported solid oxide fuel cells,” Ceram. Int., vol. 48, no. 7, pp. 9673–9680, 2022, doi: 10.1016/j.ceramint.2021.12.168.
  15. J. E. Hong, S. Ida, and T. Ishihara, “Decreased sintering temperature of anode-supported solid oxide fuel cells with La-doped CeO2 and Sr- and Mg-doped LaGaO3 films by Co addition,” J. Power Sources, vol. 259, pp. 282–288, 2014, doi: 10.1016/j.jpowsour.2014.02.106.
  16. X. Zhao, L. Xiao, B. Pan, and J. Yuan, “Modeling and prediction of structural/thermophysical properties of sintered NiO/YSZ anode for SOFC by molecular dynamics method,” J. Alloys Compd., vol. 958, p. 170502, 2023, doi: 10.1016/j.jallcom.2023.170502.
  17. M. Murutoglu, T. Ucun, O. Ulasan, A. Buyukaksoy, Y. K. Tur, and H. Yilmaz, “Cold sintering-assisted densification of GDC electrolytes for SOFC applications,” Int. J. Hydrogen Energy, vol. 47, no. 45, pp. 19772–19779, 2022, doi: 10.1016/j.ijhydene.2022.01.043.
  18. P. Satardekar, D. Montinaro, M. Z. Naik, and V. M. Sglavo, “Production of metal-supported solid oxide fuel cells by co-sintering route,” Mater. Today Proc., vol. 63, pp. 76–84, 2022, doi: 10.1016/j.matpr.2022.02.327.
  19. M. Pihlatie, A. Kaiser, and M. Mogensen, “Mechanical properties of NiO/Ni-YSZ composites depending on temperature, porosity and redox cycling,” J. Eur. Ceram. Soc., vol. 29, no. 9, pp. 1657–1664, 2009, doi: 10.1016/j.jeurceramsoc.2008.10.017.
  20. K. Chen et al., “Characteristics of NiO-YSZ anode based on NiO particles synthesized by the precipitation method,” J. Alloys Compd., vol. 454, no. 1–2, pp. 447–453, 2008, doi: 10.1016/j.jallcom.2006.12.130.
  21. H. Hayashi, T. Saitou, N. Maruyama, H. Inaba, K. Kawamura, and M. Mori, “Thermal expansion coefficient of yttria stabilized zirconia for various yttria contents,” Solid State Ionics, vol. 176, no. 5–6, pp. 613–619, 2005, doi: 10.1016/j.ssi.2004.08.021.
  22. C. Zhang et al., “Characterization of YSZ solid oxide fuel cells electrolyte deposited by atmospheric plasma spraying and low pressure plasma spraying,” Proc. Int. Therm. Spray Conf., vol. 15, no. December, pp. 598–603, 2006, doi: 10.1361/105996306X146965.

Copyright @ 2026 IRJIET. All Right Reserved.

Licensed underCreative Commons Attribution 4.0 International License.