International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Designing a Belt Conveyor System for Oil Boom Handling with Optimized Belt Material Selection

ParyantoMechanical Engineering Department, Diponegoro University, Semarang, IndonesiaMuhammad Naufal IhsanMechanical Engineering Department, Diponegoro University, Semarang, IndonesiaRusnaldyMechanical Engineering Department, Diponegoro University, Semarang, Indonesia

Vol 9 No 10 (2025): Volume 9, Issue 10, October 2025 | Pages: 75-87

International Research Journal of Innovations in Engineering and Technology

OPEN ACCESS | Research Article | Published Date: 22-10-2025

doi Logo doi.org/10.47001/IRJIET/2025.910011

pdf iconFull Text PDF
Abstract

Oil spills in marine waters pose a serious threat to marine ecosystems and the safety of coastal environments. In this context, the urgency of an efficient and safe handling system becomes very important, especially in the process of mobilizing and demobilizing (mobdemob) oil booms as oil spill barriers. This research aims to design a CAD design-based belt conveyor system using SolidWorks software, which is integrated with material strength analysis through the Finite Element Analysis (FEA) approach. Numerical simulation was conducted on SolidWorks software. The mobdemob system model was digitally designed, and then tested for mechanical strength through linear static analysis on three types of belt materials (Nylon 101, Polyethylene Low/Medium Density, and Rubber) with three thickness variations (2 mm, 5 mm, and 7 mm). The results show that Nylon 101 material with a thickness of 7 mm is the optimal choice based on a combination of low stress value (0.2792 MPa), minimal displacement (0.01808 mm), and a safety factor of more than 1. In conclusion, this CAD-CAE-based approach is able to increase equipment life, work safety, and operational cost efficiency, and makes an important contribution to design integration and digital validation in the development of oil leak handling systems. A recommendation for future research is to conduct material durability tests under real sea conditions for long-term validation.

Keywords

CAD Design, SolidWorks, Oil Boom, Belt Conveyor, Finite Element Analysis


Citation of this Article

Paryanto, Muhammad Naufal Ihsan, & Rusnaldy. (2025). Designing a Belt Conveyor System for Oil Boom Handling with Optimized Belt Material Selection. International Research Journal of Innovations in Engineering and Technology - IRJIET, 9(10), 75-87. Article DOI https://doi.org/10.47001/IRJIET/2025.910011

Licence Copyright (c) 2026 International Research Journal of Innovations in Engineering and Technology creative common licence This work is licensed under Creative common Attribution Non Commercial 4.0 Internation Licence
References
  1. Arif, Z., Chen, Z., An, C., & Dong, J. (2022). Environmental Impacts and Challenges Associated with Oil Spills on Shorelines. Journal of Marine Science and Engineering, 10(6), 1–20. https://doi.org/10.3390/jmse10060762.
  2. Baker, S., Babaei, H., Pilechi, V., & Potter, S. (2019). Research and Development of Oil Containment Boom Designs. NRC Canada.
  3. Baley, C., Davies, P., Troalen, W., Chamley, A., Dinham-Price, I., Marchandise, A., &Keryvin, V. (2024a). Sustainable polymer composite marine structures: Developments and challenges. Progress in Materials Science, 145(October), 1–108. https://doi.org/10.1016/j.pmatsci.2024.101307.
  4. Baley, C., Davies, P., Troalen, W., Chamley, A., Dinham-Price, I., Marchandise, A., &Keryvin, V. (2024b). Sustainable polymer composite marine structures: Developments and challenges. In Progress in Materials Science (Vol. 145). Elsevier Ltd. https://doi.org/10.1016/j.pmatsci.2024.101307.
  5. Barker, C. H., Kourafalou, V. H., Beegle-Krause, C. J., Boufadel, M., Bourassa, M. A., Buschang, S. G., Androulidakis, Y., Chassignet, E. P., Dagestad, K. F., Danmeier, D. G., Dissanayake, A. L., Galt, J. A., Jacobs, G., Marcotte, G., Özgökmen, T., Pinardi, N., Schiller, R. V., Socolofsky, S. A., Thrift-Viveros, D., … Zheng, Y. (2020). Progress in operational modeling in support of oil spill response. Journal of Marine Science and Engineering, 8(9), 1–55. https://doi.org/10.3390/jmse8090668.
  6. Benjamin, R., Welgemoed, J., Niekerk, T. Van, & Young, A. (2024). Autonomous oil containment system for oil spill recovery. MATEC Web of Conferences-2024 RAPDASA-RobMech-PRASA-AMI Conference, 406, 2–11. https://doi.org/https://doi.org/10.1051/matecconf/202440604009.
  7. Chen, B., Sun, H., Ye, Y., Ji, C., Pan, S., & Wang, B. (2025). Research Status and Development Trends of Joining Technologies for Ceramic Matrix Composites. In Materials (Vol. 18, Issue 4). Multidisciplinary Digital Publishing Institute (MDPI). https://doi.org/10.3390/ma18040871.
  8. Chenhao, J., &Yupeng, X. (2021). Risk Analysis and Emergency Response to Marine Oil Spill Environmental Pollution. IOP Conference Series: Earth and Environmental Science, 687(1), 1–7. https://doi.org/10.1088/1755-1315/687/1/012070.
  9. Chiria, I., Tanase, N., Apostol, S. E., Ilie, C., & Popa, M. (2017). Design Optimization of a Flywheel using SolidWorks Modeling and Simulation Capabilities. Proceedings of 8th International Conference on Energy and Environment: Energy Saved Today Is Asset for Future, CIEM 2017, October, 344–348. https://doi.org/10.1109/CIEM.2017.8120858.
  10. Damayanti, S., Amri, H., Lianda, J., Elektro, J. T., Negeri, P., & Alamat, B. (2022). RancangBangun Prototype Automatic Oil Skimmer Menggunakan Sensor Proximity BerbasisMikrokontroler. Seminar Nasional Industri Dan Teknologi (SNIT), November, 704–790.
  11. Fazarizaz, K. (2023). OptimalisasiPenggunaan Oil Boom Sebagai Sarana PencegahanPencemaran Pada Saat Kegiatan Bongkar Muat Kapal Tanker Di Tuks Ru Iv Pertamina Cilacap. SKRIPSI : Untuk Memperoleh Gelar Sarjana Terapan Pelayaran Pada Politeknik Ilmu Pelayaran Semarang.
  12. Ghanadi, M., & Padhye, L. P. (2024). Revealing the long-term impact of photodegradation and fragmentation on HDPE in the marine environment: Origins of microplastics and dissolved organics. Journal of Hazardous Materials, 465. https://doi.org/10.1016/j.jhazmat.2024.133509.
  13. Hasanain, B. (2024). The Role of Ergonomic and Human Factors in Sustainable Manufacturing: A Review. Machines, 12(3), 1–27. https://doi.org/10.3390/machines12030159.
  14. Hubert, L., David, L., Se, R., Âla, Â., Vigier, G., Degoulet, C., & Germain, Y. (2001). Physical and mechanical properties of polyethylene for pipes in relation to molecular architecture. I. Microstructure and crystallisation kinetics. www.elsevier.nl/locate/polymer.
  15. Ivshina, I. B., Kuyukina, M. S., Krivoruchko, A. V., Elkin, A. A., Makarov, S. O., Cunningham, C. J., Peshkur, T. A., Atlas, R. M., & Philp, J. C. (2015). Oil spill problems and sustainable response strategies through new technologies. Environmental Science: Processes and Impacts, 17(7), 1201–1219. https://doi.org/10.1039/c5em00070j
  16. Jayarathna, M. D. (2024). Oil Spill Response: Existing Technologies, Prospects and Perspectives. Wiley: CleanMat, 1, 78–96. https://doi.org/10.1002/clem.17
  17. Krishna, S., & Patel, C. M. (2020). Computational and experimental study of mechanical properties of Nylon 6 nanocomposites reinforced with nanomilled cellulose. Mechanics of Materials, 143. https://doi.org/10.1016/j.mechmat.2020.103318.
  18. Lat, D. C., Mohamed Jais, I. B., Ali, N., Wan Kamaruddin, W. M. I., & Nor Zarin, N. H. W. (2019). Consolidation settlement and buoyancy behaviour for different thickness of polyurethane foam as a ground improvement. Journal of Physics: Conference Series, 1349(1). https://doi.org/10.1088/1742-6596/1349/1/012110.
  19. Li, P., Cai, Q., Lin, W., Chen, B., & Zhang, B. (2016). Offshore oil spill response practices and emerging challenges. Marine Pollution Bulletin, 110(1), 6–27. https://doi.org/10.1016/j.marpolbul.2016.06.020.
  20. Liu, C., Jia, X., Wang, Y., Gu, Y., Liu, Y., Wei, L., & Xu, L. (2024). Synthesis of a new oil-absorbing PVC oil boom and its application to maritime oil spills. Scientific Reports, 14(1), 1–14. https://doi.org/10.1038/s41598-024-71437-9
  21. Moezzi, M., Yekrang, J., Ghane, M., & Hatami, M. (2020). The effects of UV degradation on the physical, thermal, and morphological properties of industrial nylon 66 conveyor belt fabrics. Journal of Industrial Textiles, 50(2), 240–260. https://doi.org/10.1177/1528083718825316.
  22. Nguyen, V. D., Hao, J., & Wang, W. (2018). Ultraviolet weathering performance of high-density polyethylene/wood-flour composites with a basalt-fiber-included shell. Polymers, 10(8), 12–16. https://doi.org/10.3390/polym10080831
  23. Ni, Y., Cheng, H., Hou, Y., & Guo, P. (2024). Study of conveyor belt deviation detection based on improved YOLOv8 algorithm. Scientific Reports, 14(1), 26876. https://doi.org/10.1038/s41598-024-75542-7.
  24. Nigussie, L., &Yeneneh, K. (2025). Modeling and performance analysis of a pneumatic steering system to enhance maneuverability in T-55 Armored Vehicles. Applications in Engineering Science, 22, 100232. https://doi.org/10.1016/j.apples.2025.100232.
  25. Asif, Z., Chen, Z., An, C., & Dong, J. (2022). Environmental Impacts and Challenges Associated with Oil Spills on Shorelines. Journal of Marine Science and Engineering, 10(6), 1–20. https://doi.org/10.3390/jmse10060762.
  26. Baker, S., Babaei, H., Pilechi, V., & Potter, S. (2019). Research and Development of Oil Containment Boom Designs. NRC Canada.
  27. Baley, C., Davies, P., Troalen, W., Chamley, A., Dinham-Price, I., Marchandise, A., &Keryvin, V. (2024a). Sustainable polymer composite marine structures: Developments and challenges. Progress in Materials Science, 145(October), 1–108. https://doi.org/10.1016/j.pmatsci.2024.101307.
  28. Baley, C., Davies, P., Troalen, W., Chamley, A., Dinham-Price, I., Marchandise, A., &Keryvin, V. (2024b). Sustainable polymer composite marine structures: Developments and challenges. In Progress in Materials Science (Vol. 145). Elsevier Ltd. https://doi.org/10.1016/j.pmatsci.2024.101307.
  29. Barker, C. H., Kourafalou, V. H., Beegle-Krause, C. J., Boufadel, M., Bourassa, M. A., Buschang, S. G., Androulidakis, Y., Chassignet, E. P., Dagestad, K. F., Danmeier, D. G., Dissanayake, A. L., Galt, J. A., Jacobs, G., Marcotte, G., Özgökmen, T., Pinardi, N., Schiller, R. V., Socolofsky, S. A., Thrift-Viveros, D., … Zheng, Y. (2020). Progress in operational modeling in support of oil spill response. Journal of Marine Science and Engineering, 8(9), 1–55. https://doi.org/10.3390/jmse8090668.
  30. Benjamin, R., Welgemoed, J., Niekerk, T. Van, & Young, A. (2024). Autonomous oil containment system for oil spill recovery. MATEC Web of Conferences-2024 RAPDASA-RobMech-PRASA-AMI Conference, 406, 2–11. https://doi.org/https://doi.org/10.1051/matecconf/202440604009.
  31. Chen, B., Sun, H., Ye, Y., Ji, C., Pan, S., & Wang, B. (2025). Research Status and Development Trends of Joining Technologies for Ceramic Matrix Composites. In Materials (Vol. 18, Issue 4). Multidisciplinary Digital Publishing Institute (MDPI). https://doi.org/10.3390/ma18040871.
  32. Chenhao, J., &Yupeng, X. (2021). Risk Analysis and Emergency Response to Marine Oil Spill Environmental Pollution. IOP Conference Series: Earth and Environmental Science, 687(1), 1–7. https://doi.org/10.1088/1755-1315/687/1/012070.
  33. Chiria, I., Tanase, N., Apostol, S. E., Ilie, C., & Popa, M. (2017). Design Optimization of a Flywheel using SolidWorks Modeling and Simulation Capabilities. Proceedings of 8th International Conference on Energy and Environment: Energy Saved Today Is Asset for Future, CIEM 2017, October, 344–348. https://doi.org/10.1109/CIEM.2017.8120858.
  34. Damayanti, S., Amri, H., Lianda, J., Elektro, J. T., Negeri, P., & Alamat, B. (2022). RancangBangun Prototype Automatic Oil Skimmer Menggunakan Sensor Proximity BerbasisMikrokontroler. Seminar Nasional Industri Dan Teknologi (SNIT), November, 704–790.
  35. Fazarizaz, K. (2023). OptimalisasiPenggunaan Oil Boom Sebagai Sarana PencegahanPencemaran Pada Saat Kegiatan Bongkar Muat Kapal Tanker Di Tuks RU IV Pertamina Cilacap. SKRIPSI : Untuk Memperoleh Gelar Sarjana Terapan Pelayaran Pada Politeknik Ilmu Pelayaran Semarang.
  36. Ghanadi, M., & Padhye, L. P. (2024). Revealing the long-term impact of photodegradation and fragmentation on HDPE in the marine environment: Origins of microplastics and dissolved organics. Journal of Hazardous Materials, 465. https://doi.org/10.1016/j.jhazmat.2024.133509.
  37. Hasanain, B. (2024). The Role of Ergonomic and Human Factors in Sustainable Manufacturing: A Review. Machines, 12(3), 1–27. https://doi.org/10.3390/machines12030159.
  38. Hubert, L., David, L., Se, R., Âla, Â., Vigier, G., Degoulet, C., & Germain, Y. (2001). Physical and mechanical properties of polyethylene for pipes in relation to molecular architecture. I. Microstructure and crystallisation kinetics. www.elsevier.nl/locate/polymer
  39. Ivshina, I. B., Kuyukina, M. S., Krivoruchko, A. V., Elkin, A. A., Makarov, S. O., Cunningham, C. J., Peshkur, T. A., Atlas, R. M., & Philp, J. C. (2015). Oil spill problems and sustainable response strategies through new technologies. Environmental Science: Processes and Impacts, 17(7), 1201–1219. https://doi.org/10.1039/c5em00070j.
  40. Jayarathna, M. D. (2024). Oil Spill Response: Existing Technologies, Prospects and Perspectives. Wiley: CleanMat, 1, 78–96. https://doi.org/10.1002/clem.17
  41. Krishna, S., & Patel, C. M. (2020). Computational and experimental study of mechanical properties of Nylon 6 nanocomposites reinforced with nanomilled cellulose. Mechanics of Materials, 143. https://doi.org/10.1016/j.mechmat.2020.103318.
  42. Lat, D. C., Mohamed Jais, I. B., Ali, N., Wan Kamaruddin, W. M. I., & Nor Zarin, N. H. W. (2019). Consolidation settlement and buoyancy behaviour for different thickness of polyurethane foam as a ground improvement. Journal of Physics: Conference Series, 1349(1). https://doi.org/10.1088/1742-6596/1349/1/012110.
  43. Li, P., Cai, Q., Lin, W., Chen, B., & Zhang, B. (2016). Offshore oil spill response practices and emerging challenges. Marine Pollution Bulletin, 110(1), 6–27. https://doi.org/10.1016/j.marpolbul.2016.06.020.
  44. Liu, C., Jia, X., Wang, Y., Gu, Y., Liu, Y., Wei, L., & Xu, L. (2024). Synthesis of a new oil-absorbing PVC oil boom and its application to maritime oil spills. Scientific Reports, 14(1), 1–14. https://doi.org/10.1038/s41598-024-71437-9.
  45. Moezzi, M., Yekrang, J., Ghane, M., & Hatami, M. (2020). The effects of UV degradation on the physical, thermal, and morphological properties of industrial nylon 66 conveyor belt fabrics. Journal of Industrial Textiles, 50(2), 240–260. https://doi.org/10.1177/1528083718825316.
  46. Nguyen, V. D., Hao, J., & Wang, W. (2018). Ultraviolet weathering performance of high-density polyethylene/wood-flour composites with a basalt-fiber-included shell. Polymers, 10(8), 12–16. https://doi.org/10.3390/polym10080831.
  47. Ni, Y., Cheng, H., Hou, Y., & Guo, P. (2024). Study of conveyor belt deviation detection based on improved YOLOv8 algorithm. Scientific Reports, 14(1), 26876. https://doi.org/10.1038/s41598-024-75542-7.
  48. Nigussie, L., &Yeneneh, K. (2025). Modeling and performance analysis of a pneumatic steering system to enhance maneuverability in T-55 Armored Vehicles. Applications in Engineering Science, 22, 100232. https://doi.org/10.1016/j.apples.2025.100232.
  49. Obi, Kamgba, & Obi. (2014). Techniques of Oil Spill Response in the sea. IOSR Journal of Applied Physics, 6(1), 36–41. https://doi.org/10.9790/4861-06113641.
  50. Regassa Hunde, B., & Debebe Woldeyohannes, A. (2022). Future prospects of computer-aided design (CAD) – A review from the perspective of artificial intelligence (AI), extended reality, and 3D printing. In Results in Engineering (Vol. 14). Elsevier B.V. https://doi.org/10.1016/j.rineng.2022.100478.
  51. Rudawska, A., Madleňák, R., Madleňáková, L., &Droździel, P. (2020). Investigation of the effect of operational factors on conveyor belt mechanical properties. Applied Sciences (Switzerland), 10(12), 1–17. https://doi.org/10.3390/APP10124201/
  52. Selvakumar, N., Dhanasekar, K., Whaiprib, P., & Munuswamy, N. (2018). Impact of January 2017 oil spill on the biota off Chennai, southeast coast of India with emphasis on histological impact on crab, Grapsusalbolineatus. J. Mar. Biol. Ass. India, 59(2), 19–23. https://doi.org/10.6024/jmbai.2017.59.2.1989-08.
  53. Sharma, R. K., Gurjar, B. R., Singhal, A. V., Wate, S. R., Ghuge, S. P., & Agrawal, R. (2015). Automation of emergency response for petroleum oil storage terminals. Safety Science, 72(October 2014), 262–273. https://doi.org/10.1016/j.ssci.2014.09.019.
  54. Sun, Y., Ma, L., Song, Y., Phule, A. D., Li, L., & Zhang, Z. X. (2021). Efficient natural rubber latex foam coated by rGO modified high density polyethylene for oil-water separation and electromagnetic shielding performance. European Polymer Journal, 147. https://doi.org/10.1016/j.eurpolymj.2021.110288.
  55. Syofyan, A. (2010). Tanggung Jawab Dalam Pencemaran Laut Yang Disebabkan Oleh Minyak Menurut Hukum Internasional. Inspirasi, X(Juli), 139–164.
  56. Tsunazawa, Y., Kosaku, Y., Kamo, R., Miyazawa, R., Nishina, Y., &Tokoro, C. (2024). DEM study on investigation of wet particle conveying efficiency in an inclined belt conveyor system. Advanced Powder Technology, 35(7), 104555. https://doi.org/10.1016/j.apt.2024.104555.
  57. Vardaan, K., & Kumar, P. (2022). Design, analysis, and optimization of thresher machine flywheel using Solidworks simulation. Materials Today: Proceedings, 56, 3651–3655. https://doi.org/10.1016/j.matpr.2021.12.348.
  58. Yadla, V. A. K. (2024). A novel virtual manufacturing system synergising operations and operators for enhanced efficiencies. A Thesis Submitted in Total Fulfillment of the Requirements of Doctor of Philosophy, April.
  59. Zhang, Z. (2024). Application of finite element analysis in structural analysis and computer simulation. Applied Mathematics and Nonlinear Sciences, 9(1). https://doi.org/10.2478/amns.2023.1.00273.
  60. Zhao, J., Dong, J., Liu, Z., & Xie, H. (2019). Characterization method of mechanical properties of rubber materials based on in-situ stereo finite-element-model updating. Polymer Testing, 79. https://doi.org/10.1016/j.polymertesting.2019.106015.

Copyright @ 2026 IRJIET. All Right Reserved.

Licensed underCreative Commons Attribution 4.0 International License.