International Research Journal of Innovations in Engineering and Technology - IRJIET International Open Access, Monthly, Peer Reviewed, Reputed Journal ISSN (online): 2581-3048

Impact Factor (2025): 6.9

DOI Prefix: 10.47001/IRJIET

Sustainable Geopolymer Concrete Using Recycled Brick Dust and Fly Ash: A Strength-Based Study

Syria MostakLecturer, Department of Civil Engineering, Presidency University, Dhaka, BangladeshMd. Abdur RaufStudent, Department of Civil Engineering, Presidency University, Dhaka, BangladeshM.M. Fahad Islam BarnoLecturer, Department of Civil Engineering, Presidency University, Dhaka, Bangladesh

Vol 9 No 9 (2025): Volume 9, Issue 9, September 2025 | Pages: 54-64

International Research Journal of Innovations in Engineering and Technology

OPEN ACCESS | Research Article | Published Date: 06-10-2025

doi Logo doi.org/10.47001/IRJIET/2025.909009

pdf iconFull Text PDF
Abstract

The rapid increasing demand for concrete driven by rapid urbanization has resulted in significant natural resource depletion and a rise in carbon dioxide emissions associated with ordinary Portland cement (OPC) production. This study investigates the development of geopolymer concrete (GPC) as a sustainable and environmentally friendly alternative, utilizing recycled brick dust (RBD) and fly ash (FA) as alumino-silicate-based binders. In this research focuses on the partial replacement of FA with RBD at varying ratios (0%, 20%, 40%, 50%, 60%, and 80%) to evaluate its impact on compressive strength. The geopolymer mixtures were activated used of sodium hydroxide (NaOH) and sodium silicate (Na₂SiO₃), with the NaOH concentration kept constant at 10M. A fixed Na₂SiO₃/NaOH ratio of 2.5 and an alkali activator-to-binder ratio of 0.4 were maintained across all mixes. Each Specimens were heat-cured at 90°C for 24 hours, followed by ambient curing for 3, 7, and 14 days. The Specimen compressive strength tests were conducted to determine the mechanical performance of the resulting GPC. The results shown that replacing fly ash with 40–60% brick dust produced the highest compressive strength, reaching approximately 48.03 MPa at 14 days, compared to 30 MPa for conventional cement concrete blocks. The study displayed that potential of RBD and FA-based GPC as a high-strength, eco-conscious construction material. By using this industrial waste, this application not only reduces dependency on OPC but also contributes to lower carbon emissions and enhanced sustainability in construction practices.

Keywords

Alumino-Silicate, Binder, Recycled Brick dust, Compressive Strength, Geopolymer Concrete


Citation of this Article

Syria Mostak, Md. Abdur Rauf, & M.M. Fahad Islam Barno. (2025). Sustainable Geopolymer Concrete Using Recycled Brick Dust and Fly Ash: A Strength-Based Study. International Research Journal of Innovations in Engineering and Technology - IRJIET, 9(9), 54-64. Article DOI https://doi.org/10.47001/IRJIET/2025.909009

Licence Copyright (c) 2026 International Research Journal of Innovations in Engineering and Technology creative common licence This work is licensed under Creative common Attribution Non Commercial 4.0 Internation Licence
References
  1. Bhatta, A., Priyadarshinia, S., Mohanakrishnana, A.A., Abria, A., Sattlera, M., Techapaphawitc, S. (2019). Physical, chemical, and geotechnical properties of coal fly ash: A global review. Case Studies in Construction Materials, 11, e00263.
  2. Almohanaa, A.I., ARBDulwahidb, M.Y., Galobardes, I., Mushtaq, J., Almojil, S.F. (2022). Producing sustainable concrete with plastic waste: A review. Environmental Challenges, 9, 100626.
  3. Awoyeraa, P.O., Adesinab, A. (2020). Plastic wastes to construction products: Status, limitations and future perspective. Case Studies in Construction Materials, 12, e00330.
  4. Cajka, R., Marcalikova, Z., Kozielova, M., Mateckova, P., Sucharda, O. (2020). Experiments on Fiber Concrete Foundation Slabs in Interaction with the Subsoil. Multidisciplinary Digital Publishing Institute (MDPI), 12(9).
  5. Arivalagan, S. (2020). Experimental Study on the Properties of Green Concrete by Replacement of E-Plastic Waste as Aggregate. ScienceDirect, 172, 985-990.
  6. Zeyad, A.M. (2020). Effect of fibers types on fresh properties and flexural toughness of self-compacting concrete. Journal of Materials Research and Technology, 9(3), 4147-4158.
  7. Provis, J. L., & van Deventer, J. S. J. (2014). Alkali Activated Materials. Springer. https://doi.org/10.1007/978-94-007-7672-2.
  8. Ganesh, A. C., Mohana, K. N., & Kumari, P. R. (2023). Optimization of GGBS and iron slag in fly ash–based geopolymer paver blocks with banana fiber reinforcement. Materials Today: Proceedings, [In press]. https://doi.org/10.1016/j.matpr.2023.04.192.
  9. Afonso, M. L., Custódio, J., Marques, A., & Santos, R. (2021). Geopolymer mortars with glass polishing waste: Influence of SiO₂/Al₂O₃ ratio on physical and mechanical properties. Construction and Building Materials, 302, 124288. https://doi.org/10.1016/j.conbuildmat.2021.124288.
  10. Deb, P. S., Nath, P., & Sarker, P. K. (2014). The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature. Materials & Design, 62, 32–39. https://doi.org/10.1016/j.matdes.2014.05.001.
  11. Zhang, Z., Wang, H., Zhu, Y., Reid, A., & Provis, J. (2021). Geopolymer concrete: The role of waste brick powder as supplementary material. Construction and Building Materials, 301, 124089. https://doi.org/10.1016/j.conbuildmat.2021.124089.
  12. Liu, J., Li, Y., & Yang, J. (2019). Sustainable brick waste–based geopolymer concrete: Mechanical performance and environmental impact assessment. Journal of Cleaner Production, 221, 102–114. https://doi.org/10.1016/j.jclepro.2019.02.229.
  13. Shukla, H. (2019). A Study on Partial Replacement of Sand By Plastic Waste In Standard Concrete. International Journal of Civil Engineering, 6(7).
  14. Charudatta, P.T., Husain, M. (2017). Reuse of Plastic Waste as Replacement of Sand in Concrete. International Journal of Innovative Research in Science, Engineering and Technology, 6.
  15. Sayem, S., Drishya, P. (2018). Reuse of Plastic Waste as Replacement of M Sand in Concrete. Journal of Engineering, 8, 41-47.
  16. Amalu, R., et al. (2020). Research on use of waste plastic in concrete. Journal of Sustainable Construction Materials, 5(2), 45-52.
  17. The Daily Star. (2023). The time to beat plastic pollution is now or never. Retrieved from https://www.thedailystar.net
  18. Rahman, M. M., Hossain, M. M., & Imran, M. A. (2020). Characterization of fly ash from Barapukuria thermal power plant for potential reuse. Journal of Material Cycles and Waste Management, 22(4), 1098–1108. https://doi.org/10.1007/s10163-020-00991-3.
  19. Dimas, D. D., Giannopoulou, I. P., & Panias, D. (2009). Polymerization in sodium silicate solutions: A fundamental process in geopolymerization technology. Journal of Materials Science, 44(14), 3719–3730. DOI: https://doi.org/10.1007/s10853-009-3497-5.
  20. Nath, P., & Sarker, P. K. (2014). Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition. Construction and Building Materials, 66, 163–171. https://doi.org/10.1016/j.conbuildmat.2014.05.080.
  21. Sharmin, S., Biswas, W.K., Sarker, P.K., “Exploring the Potential of Using Waste Clay Brick Powder in Geopolymer Applications: A Comprehensive Review”, Buildings for the 21st Century, Vol. 14(8), July 2024.
  22. Mishra, J., Nanda, B., Patro, S.K., and R. Krishna, R.S., “Sustainable Fly Ash Based Geopolymer Binders: A Review on Compressive Strength and Microstructure Properties”, Advances in Sustainable Construction and Building Materials, Vol. 14(22), November 2022.
  23. BDStall, “Sand Price in Bangladesh 2025”. Available Online, Accessed on July 2025, https://www.bdstall.com/sand/
  24. Bangladesh Post, “Payra power plant supplying fly ash”. Available Online, Accessed on July 2025, https://bangladeshpost.net/posts/payra-power-plant- supplying-fly-ash-46181.

Copyright @ 2026 IRJIET. All Right Reserved.

Licensed underCreative Commons Attribution 4.0 International License.